The difference between pneumatic meter out and meter in throttle valve

Throttle valve is called speed controller or flow control valve. They are usually positioned near to air cylinder to control the speed of air cylinder.


Feature as below

1. Mainly installed in the air actuator.
2. Working Pressure: 0-150 Psi.
3. Working Temperature: 32 -140°F / 0-60℃

Meter Out throttle valve

The flow rate of air entering from the thread side can be controlled, whereas air entering from joint side comes out from the thread side at the same flow rate (not controlled).


Meter in throttle valve

The flow rate of air entering from the joint side can be controlled, whereas air entering from thread side come out from joint side at the same speed (not controlled).

Flat type flow control valve

The way to control of flow or control flow upon piping in accordance with the signal on the body.
Air flows from each side of valve.

Comments

  1. XHNOTIONAugust 3, 2016 at 2:18 AM

    http://www.xpneumatic.com/difference-pneumatic-meter-meter-throttle-valve/

    ReplyDelete

Post a Comment

Popular posts from this blog

A Coverall Guide to Choose a Right Solenoid Valve

Image
When you talk about the biggest sector in the world in terms of dollar value, the oil and gas industry is a global powerhouse employing over hundreds of thousands of workers worldwide as well as generating huge amount in billions of dollars globally each year. The oil and gas companies are so vital they often contribute a significant amount towards national GDP and this great success cannot be achieved without exploration, extraction, refining, transporting, and marketing of end products which is vital to many industries, and is of high significance to critically take certain measures to preserving this process of great value starting from timely maintenance schedule, dual routine checks and streamed down replacement of some essential devices like the  Solenoid Valves . But what exactly is a Solenoid Valve? Solenoid valves  are devices electromechanically operated with the use of a solenoid to change the state of a valve from open to close to control the flow liquid or gas.
Read more
Image
L et you become a solenoid valve expert   The use of solenoids are so beneficial in a wide variety of machines and industries because of their reliability, cost effectiveness and longevity. There are also several different kinds of these valves to meet various specific needs of industry. Solenoid valves are either direct-acting or pilot-operated valves. They also come with two or more ports. Direct-acting solenoid valves are most often used for controlling low volume valves. This is because they contain just one electromechanical control set. Pilot-operated valves are comprised of a combination of valves, making it possible to use them in higher volume applications. If you are interested in XHnotion Pneumatic   solenoid valve either water or air solenoid valves, you should know that you can find them on the Internet on certain websites. Before buying one, try to compare all the products that you find to find the right one for you.
Read more